Indian standard code list for civil engineering

REFERENCE CODES & STANDARDS FOR CIVIL ENGINEERING AS PER BUREAU OF INDIA STANDARDS (IS)

 

EARTH WORKS

IS 632 : Gamma – BHC (Lindane) emulsifiable concentrates
IS 1200 (Pt 1) : Method of measurement of earth work
IS 1200 (Pt-27) : Method of measurement of earth work (by Mechanical Appliances )
IS 4081 : Safety code for Blasting and related drilling operation
IS 4988 (Part IV) : Excavators
IS 6313 (pt-II) : Anti Termite measures in buildings (pre -constructional)
IS 6313(pt.-III) : Anti Termite Measures in Buildings for existing buildings
IS 6940 : Methods of test for pesticides and their formulations
IS 8944 : Chlorpyrifos emulsifiable concentrates
IS 8963 : Chlorpyrifos – Technical specifications
IS 12138 : Earth moving Equipments

MORTARS

IS 269 : Specification for 33 grade ordinary Portland cement
IS 383 : Specification for coarse and fine aggregate from natural source for concrete.
IS 455 : Specification for Portland slag cement.
IS 460 (Part I) : Specification for test sieves: wire cloth test sieves.
IS 650 : Specification for standard sand for testing of cement
IS 1269 : Specification for 53 grade ordinary Portland cement
IS 1344 : Specification for calcined clay Pozzolana.
IS 1489 : Specification for Portland pozzolana cement
IS 1542 : Specification for sand for plaster
IS 1727 : Methods of Test for Pozzolanic materials
IS 2116 : Specification for sand for masonry mortar.
IS 2250 : Code of practice for preparation and use of masonry Mortar.
IS 2386 (Pt-I) : Method of test for aggregate for concrete (Particle size and shape)
IS 2386 (Pt-II) : -Do- Estimation of deleterious materials and organic impurities.
IS 2386 (Pt-III) : -Do- Specific gravity, density, voids, absorption and bulking.
IS 3025 : Method of sampling and test for water
IS 3406 : Specification for masonry cement.
IS 3812 (Part I) : Specification for flyash for use as pozzolana in cement mortar and Concrete
IS 3812 (Part II) : Specification for flyash for use as admixture in cement martar and Concrete
IS 4031 (Part I) to (Part XIII) : Method of Physical test for hydraulic cement
IS 4032 : Method of chemical analysis of Hydraulic cement.
IS 8041 : Rapid hardening Portland cement.
IS 8042 : Specification for white cement
IS 8043 : Hydrophobic Portland cement IS 8112 : Specification for 43 grade ordinary Portland cement
IS 11652 : Woven HDPE sacks for packing cement
IS 11653 : Woven polypropylene sacks for packing cement
IS 12174 : Jute synthetic union bags for packing cement

CONCRETE WORKS

IS 383 : Specification for coarse and fine aggregate from natural sources for concrete.
IS 456 : Plain and reinforced concrete – Code of practice
IS 516 : Method of test for strength of concrete
IS 1199 : Method of sampling and analysis of concrete IS 1200 : (Part II) : Method of measurement of building and civil engineering work (concrete work)
IS 1322 : Specification for bitumen felt for water proofing and damp proofing.
IS 1791 : General requirements for batch type conrete mixers
IS 2386 : Method of test for aggregates for concrete
(a) Part I : – Particle size and shape
(b) Part II : – Estimation of deleterious materials and organic impurities
(c) Part III : – Specific gravity, density, voids absorption and bulking.
(d) Part IV : – Mechanical properties.
(e) Part V : – Soundness
IS 2505 : General requirements for concrete vibrators – immersion type.
IS 2506 : General requirements for concrete vibrators – screed board concrete Vibrators
IS 2645 : Specification for integral water proofing compounds for cement mortar and concrete
IS 3068 : Specification for broken brick (burnt clay) coarse aggregate for use in concrete.
IS 3812 : Specification for flyash for use as pozzolana and admixture in cement mortar and concrete.
IS 4656 : Specification for form vibrators for concrete.
IS 7861 (Part-I) : Code of practice for extreme weather concreting (Part-I)

Recommended practice for hot weather concreting.

IS 383 : Specification for coarse and fine aggregate from natural sources for concrete.
IS 456 : Plain and reinforced concrete – Code of practice
IS 516 : Method of test for strength of concrete
IS 1199 : Method of sampling and analysis of concrete
IS 1200 (Part II) : Method of measurement of building and civil engineering work (concrete work)
IS 1322 : Specification for bitumen felt for water proofing and damp proofing.
IS 1791 : General requirements for batch type conrete mixers
IS 2386 : Method of test for aggregates for concrete
(a) Part I : – Particle size and shape
(b) Part II : – Estimation of deleterious materials and organic impurities
(c) Part III : – Specific gravity, density, voids absorption and bulking.
(d) Part IV : – Mechanical properties.
(e) Part V : – Soundness
IS 2505 : General requirements for concrete vibrators – immersion type.
IS 2506 : General requirements for concrete vibrators – screed board concrete Vibrators
IS 2645 : Specification for integral water proofing compounds for cement mortar and concrete
IS 3068 : Specification for broken brick (burnt clay) coarse aggregate for use in concrete.
IS 3812 : Specification for flyash for use as pozzolana and admixture in cement mortar and concrete.
IS 4656 : Specification for form vibrators for concrete. IS 7861 (Part-I) : Code of practice for extreme weather concreting (Part-I) Recommended practice for hot weather concreting. IS 7861 (Part–II) : Code of practice for extreme weather concreting (Part-II) recommended.
IS 9103 : Specification for concrete admixtures

REINFORCED CEMENT CONCRETE WORKS

IS 226 : Structural Steel
IS 432 (Part I) : Specification for mild steel and medium tensile steel bars and hard Drawn steel wire for concrete reinforcement part-I mild steel and medium tensile steel bars.
IS 432 (Part II) : Specification for mild steel and medium tensile steel bars and hard
Drawn steel wire for concrete reinforcement – Part-II hard drawn steel wire.
IS 456 : Code of Practices for plain and Reinforced concrete.
IS 516 : Method of test for strength of concrete.
IS 716 : Specification for pentachlorophenol
IS 1199 : Method of sampling and analysis of concrete.
IS 1200 (Part II) : Method of measurement of building and civil engineering work – Concrete work
IS 1200 (Part V) : Method of measurement of building and civil engineering work – Concrete work (Part 5- Form work)
IS 1566 : Specification for hard drawn steel wire fabric for concrete requirement.
IS 1599 : Method for bend test
IS 1343 : Code of Practice for Pre stressed Concrete
IS 1608 : Method for tensile testing of steel products
IS 1786 : Specification for high strength deformed steel and wires for concrete reinforcement.
IS 1791 : Specification for batch type concrete mixes
IS 2502 : Code of practice for bending and fixing of bars for concrete reinforcement.
IS 2751 : Recommended practice for welding of mild steel plain and deformed Bars for reinforced construction.
IS 4925 : Batch plants specification for concrete batching and mixing plant
IS 4926 : Ready – Mixed Concrete
IS 6523 : Specification for precast reinforced concrete door, window frames IS 10262 : Recommended guidelines for concrete mix design
IS 13311 (Part I) : Indian standard for non-destructive testing of concrete. Method of test For ultrasonic pulse velocity
IS 13311 (Part II) : Indian standard for non-destructive testing of concrete. Method of Testing by rebound hammer

BRICK WORK

IS 712 : Specification for building limes.
IS 1077 : Common burnt clay building bricks.
IS 1200 (Part 3) : Method of measurements of brick works
IS 2212 : Code of practice for brick work. (1st Revision)
IS 2222 : Specification for burnt clay perforated building bricks.
IS 2849 : Specification for non load bearing gypsum partition blocks, (Solid and hollow types)
IS 3495 : Method of test for burnt clay building bricks.
IS 3812 : Specification for fly ash for use as pozzolana and admixture.
IS 4139 : Specification of calcium silicate bricks
IS4885 : Specification for sewer brick
IS 5454 : Methods of sampling of clay building bricks.
IS 12894 : Pulverized fuel ash lime bricks specification,
IS13757 : Specification of burnt clay fly ash bricks.

STONE WORK

IS 737 : Specifications for wrought aluminium and aluminium alloy, steel and strip for general engineering purpose.
IS 1121 – (Pt. I) : Methods of determination of properties and strengths of natural Building stones (Part-I compressive strength).
IS 1122 : Methods for determination of specific gravity of natural building stone
IS 1123 : Methods of identification of natural building stones.
IS 1124 : Methods of test of determination of water absorption, apparent, Specific gravity and porposity of natural building stones.
IS 1125 : Methods of test of determination of weathering of natural building Stone
IS 1126 : Methods of test for determination of durability of natural building stone
IS 1128 : Specification for Lime stone (Slab & Tiles).
IS 1129 : Recommendations for dressing of natural building stones.
IS 1200 (Pt. IV) : Methods of measurements of building and Civil engineering works Stone Masonry.
IS 1197 (Pt. I) : Code of practice for construction of rubble stone masonry
IS 1597 (Pt. II) : Code of practice for construction of ashlar stone masonry
IS 1805 : Glossary of terms relating to stones, quarrying and dressing
IS 3620 : Specification for latrite stone block for masonry
IS 3622 : Sand stone (Slab & Tiles)
IS 4104 (Pt. I) : Code of practice for external facings and veneers (Part I-Stone facing).
IS 4101 (Part II) : Code of practice for external facing and veneers: (Part II-Cement Concrete facing).

MARBLE WORK

IS 1122 : Method of test for determination of true specific gravity of natural building stones.
IS 1124 : Method of test for determination of water absorption, apparent Specific gravity and porosity of natural building stones.
IS 1130 : Marble (blocks, slabs and tiles).
IS 4101 (Part 1) : Code of practice for external facing and veneers: Stone facing.
IS 3316 : Specifications for structural granite
IS 14223 (Part 1) : Polished Building Stones (Part-1) Granite

WOOD WORK & PVC WORK

IS 204 (Part I) : Specification for tower bolts (ferrous bolt)
IS 204 (Part II) : Specification for tower bolts (non ferrous metals)
IS 205 : Specification for non ferrous metal butt hinges
IS 206 : Specification for Tee and strap hinges
IS 207 : Specification for Gate and shutter hook and eye
IS 208 : Specification for door handles
IS 281 : Specification for mild steel door bolts for use with pad locks
IS 287 : Recommendations for maximum permissible moisture contents of timber used for different purpose
IS 303 : Specification for plywood for general purposes
IS 362 : Specification for parliament hinges
IS 363 : Specification for hasps and stapple
IS 364 : Specification for fan light catch
IS 401 : Code of practice for preservation of timber
IS 419 : Putty for use on window frames
IS 451 : Technical supply condition for wood screws
IS 452 : Specification for door spring rat tail type
IS 453 : Specification for double acting spring hinge
IS 707 : Glossary of terms applicable to timber technology and Utilization
IS 710 : Specifications for Marine Plywood
IS 723 : Specification for steel counter sunk head wire nails.
IS 729 : Specification for drawer lock, cup board lock and box locks
IS 848 : Specification for synthetic resin adhesive for plywood (phenoic and amino plastic)
IS 851 : Specification for synthetic resin adhesive for const. work (non structural in wood) IS 852 : Specification for animal glue for general wood work purpose
IS 1003 (Part I) : Specification for timber panelled and glazed shutter Part I (door shutters)
IS 1003 (Part II) : Specification for timber panelled and glazed shutter Part II (window and ventilator shutter)
IS 1141 : Specification for code of practice for seasoning of timber
IS 1200 Part XIV : Method of measurement of building and civil engg work glazing.
IS 1200 Part XII : Wood work and joinery
IS 1328 : Specification for veneered decorative plywood
IS 1341 : Specification for steel butt hinges
IS 1378 : Specification for oxidized copper finishes
IS 1566 : Specification for hard drawn steel wire fabric
IS 1568 : Specification for wire cloth for general purpose
IS 1658 : Specification for hard drawn steel wire fabric
IS 1659 : Specification for block boards
IS 1708 (Part 1 to 18) : Testing of small clear specimen for timber
IS 1734 : Determination of density and moisture content.
IS 1823 : Specification for floor door stopper
IS 1868 : Specification for anodic coating on aluminium and its alloy
IS 2046 : -do- Decorative thermosetting synthetic resin bonded laminated sheet
IS 2095 : pecification for gypsum plaster board
IS 2096 : Specification for asbestos cement flat sheet.
IS 2202 (Pt I) : Specification for wooden flush door shutter, solid core type (plywood face panels )
IS 2202 (Part II ) : -do- (Particle boards and hard board face panels)
IS 2209 : Specification for mortice lock (Vertical Type )
IS 2380 : Method of test for wood particle board and board for Lignocelluloses material IS 2547 : Specification for gypsum plaster
IS 2753 : Method for estimation of preservatives in treated timber and in treating solutions.
IS 2681 : Specification for non-ferrous metal sliding door bolts use with pad locks
IS 3087 : Specification for wood particle boards (Medium density) for General purpose.
IS 3097 : Specification for veneered particle board
IS 3828 : Specification for ventilator chain
IS 3400 (Part II) : Method of test for Vulcanized rubber (hardness)
IS 3400 (Part IV) : Accelerated aging
IS 3400 (Part IX) : Density
IS 3564 : Specification for door closer (hydraulically regulated)
IS 3618 : Phosphate treatment of iron and steel for protection against Corrosion
IS 3813 : “C” hooks for use with swivels
IS 3818 : Specification for continuous (Piano) hinges
IS 3847 : Specification for mortice night latch
IS 4835 : Specification for polyvinyl acetate dispersion based adhesive for wood
IS 4948 : Specification for welded steel wire fabric for general use
IS 4992 : Specification for rebated mortice lock
IS 5187 : Specification for flush bolts
IS 5509 : Specification for Fire Retardant Plywood
IS 5930 : Specification for mortice latch
IS 6318 : Specification for plastic wire window fastners
IS 6607 : Specification for rebated mortice lock (Vertical type)
IS 6760 : Specification for sloted counter sunk head wood screws.
IS 7196 : Specification for hold fast IS 7534 : Specification for sliding locking bolts for use with pad lock
IS 7638 : Wood/lignocellulosic based panel products – Method for Sampling
IS 8756 : Specification for mortice ball catch for use in wooden almirah
IS 9308 (Part II) : Specification for mechanically extracted coir fibres. (Mattress coir fibres)
IS 9308 (Part III) : -do- Decorated coir fibre
IS 11215 : Moisture content of timber and timber products method of Determination
IS 12049 : Dimensions and tolerance relating to wood based panel Materials
IS 12406 : Specification for medium density fibre board
IS 12817 : Specification for stainless steel Butt Hinges
IS 12823 : Specification for wood products –Prelaminated particle Boards
IS 14616 : Specifications for laminated veneer lumber
IS 14842 : Specification for coir veneer board for general purposes
IS 14856 : Specification for glass fibre reinforced plastic (FRP) panel type door
IS 14900 : Specifications for transparent float glass

STEEL WORK

IS 63 : Whiting for paints and putty
IS 198 : Varnish gold size
IS 228 : Structural steel (Standard quality)
IS 277 : Specification for galvanized steel sheets (Plain and corrugated)
IS 800 : Code of practice for use of structural steel in general in steel Construction
IS 806 : Code of practice for use of steel Tubes in general building Construction
IS 808 : Dimensions for Hot rolled steel beams, columns, channel and Angle sections
IS 812 : Glossary of terms relating to welding and cutting metals
IS 813 : Scheme of symbols for welding
IS 814 : Covered electrodes for manual metal arc welding of carbon and carbon manganese steel
IS 816 : Code of practice for use of metal arc welding for general construction in mild steel
IS 817 : Code of practice for training and testing of metal arc welders
IS 818 : Code of practice for safety and healthy requirements in electric and gas welding and cutting operations
IS 822 : Code of procedure for inspection of welds
IS 823 : Manual for metal arc welding in mild steel
IS 1038 : Steel doors, windows and ventilators
IS 1081 : Code of practice for fixing and glazing of metal (Steel and aluminium) doors, windows and ventilators
IS 1148 : Hot rolled steel rivet bars (upto 40 mm diameters) for structural purposes
IS 1161 : Steel tubes for structural purposes
IS 1182 : Recommended practice for radiographic examination of fusion welded butt joints in steel plates IS 1200- (Pt. VIII) : Method of measurements of steel work and iron works
IS 1363 Part I : Haxagon head bolts, screws, and nuts of product grade C (Hexagon Head bolt)
IS 1363 Part II : Haxagon Head Bolts, screws and nuts of product Grade ‘C’
IS 1363 Part-III : Haxagan Head Bolts, screws and Nuts of product grade ‘C’
IS 1367 : Technical supply conditions for threaded steel fasteners
IS 1599 : Method for bend test
IS 1608 : Metallic materials – Tensile Testing at Ambient Temperature.
IS 1821 : Dimensions for clearance holes for bolts and screws
IS 1852 : Rolling and cutting tolerance for hot rolled steel products
IS 1894 : Method for tensile testing of steel tubes
IS 1977 : Structural steel (ordinary quality)
IS 2062 : Hot Rolled low, medium and high tensile structural steel
IS 2074 : Ready mixed paint, air drying redoxide zinc chrome priming
IS 4351 : Specification for steel door frames
IS 4454 (Part I) : Steel wires for mechanical springs. Cold drawn unalloyed steel wire.
IS 4711 : Methods for sampling of steel pipes, tube and fittings.
IS 4736 : Hot – dip zinc coating on mild steel tubes
IS 4923 : Hollow Steel Sections for Structural Use – Specification
IS 6248 : Metal rolling shutters and rolling grills
IS 7452 : Specification for hot rolled steel sections for doors, windows And ventilators.

FLOORING WORK

IS 269 : Specification for 33 grade ordinary portland Cement
IS 401 : Code of practice for preservation of timber
IS 451 : Technical supply conditions for wood screws
IS 455 : Specification for portland slag cement
IS 661 : Code of practice for thermal insulation of cold storages
IS 702 : Specification for industrial bitumen
IS 1124 : Method of test for determination of water absortion, apparent specific gravity and porosity of natural building stones
IS 1130 : Specification for marble (blocks, slabs and tiles)
IS 1141 : Code of practice for Seasoning of timber
IS 1200-(Part XI ) : Method of measurement of Building and Civil Engineering Work (Part 11) paving, floor finishes, dado and skirting
IS 1237- Edition 2.3 : Specification for cement concrete flooring tiles
IS 1322 : Specification for bitumen felts for water proofing and Dampproofing
IS 1443 : Code of practice for laying and finishing of cement concrete flooring tiles
IS 1489 (Part-I) : Specification for portland pozzolana cement (Part-I) flyash Based
IS 1489-(Part II) : Specification for Portland pozzolana cement (Part II) calcined clay based
IS 1580 : Specification for bituminous compounds for water proofing And caulking purpose
IS 2114 : Code of practice for laying in-situ terrazzo floor finish
IS 2571 : Code of practice for laying in-situ cement concrete flooring
IS 3622 : Specification for sand stone (Slab & Tiles)
IS 3670 : Code of practice for construction of timber floors
IS 4457 : Acid and/or alkali Resistant tiles.
IS 5318 : Code of practice for laying of hard wood parquet and wood block floors IS 5766 : Code of practice for laying of burnt clay brick floor
IS 8041 : Specification for rapid hardening portland cement
IS 8042 : Specification for white portland cement
IS 8043 : Specification for hydrophobic portland cement
IS 8112 : Specification for 43 grade ordinary portland cement
IS 12330 : Specification for sulphate resisting portland cement.
IS: 13630 (Part-1 to 15) : Methods of Testing of ceramic tiles
IS 13712 : Specification for ceramic tiles; definition, classification characteristic and marking
IS 15622 : Specification for pressed ceramic tile

ROOFING WORK

IS 73 : Specification for paving Bitumen
IS 277 : Galvanised steel sheets (plain and corrugated)
IS 651 : Glazed stoneware pipes and fittings
IS 702 : Specification for industrial bitumen
IS 1199 : Methods of sampling and analysis of concrete
IS 1200 (PT.IX) : Method of measurements of building and civil engineering works:Part – 9 Roof covering ( including cladding)
IS 1200 (PTX) : Method of measurements of building and civil engineering works:Part -10 ceiling and lining
IS 1230 : Cast iron rain water pipes and fitting
IS 1367 (PT -13) : Technical supply conditions for threaded steel fasteners pt.13 hot dip galvanized coating on threaded fasteners
IS 2095 (PT-1) : Gypsum plaster boards (Pt.1) plain Gypsum plaster boards
IS 2115 : Code of practice for flat roof finish: mud phuska
IS 2633 : Method of testing uniformity of coating on zinc coated articles
IS 2645 : Specification for integral water proofing compounds for cement mortar and concrete
IS 3007 (PT.1) : Code of practice for laying of asbestos cement sheets: part- 1 Corrugated sheets
IS 3007 (PT.2) : Code of practice for laying of asbestos cement sheets part- 2 Semicorrugated sheets
IS 3087 : Particle boards of wood and other lignocellulogic materials (medium density) for general purposes – specifications
IS 3144 : Methods of test for mineral wool thermal insulation materials
IS 3346 : Method of the determination of thermal conductivity of thermal Insulation materials
IS 3348 : Specification for fibre insulation boards
IS 3384 : Specification for bitumen primer for water proofing and damp Proofing IS 4671 : Expanded polystyrene for thermal insulation purposes
IS 5382 : Specification for rubber sealing rings for gas mains, water mains and sewers
IS 5688 : Methods of test of performed block type and pipe covering type thermal insulations
IS 6598 : Cellular concrete for thermal insulation
IS 7193 : Specification for glass fibre base coal tarpitch & bitumen felts (Amendment I)
IS 8183 : Bonded mineral wool
IS 10192 : Specifications for synthetic resin bonded glass fibre (SRBGF) For electrical purposes.
IS 13592 : Unplasticised polyvinyl chloride (UPVC) pipes for soil and Waste discharge system for inside and outside building.
IS 14753 : Specifications for polymethyl Methacrylate (PMMA) (Arylic) Sheets
IS 14862 : Fibre cement flat sheets – specifications
IS 14871 : Specifications for products in fibre reinforced cement – Long Corrugated or Asymmetrical section sheets and fittings for roofing and cladding.

FINISHING WORK

IS 16(Pt-I) Shellac : Part : I : — Hand Made Shellac
IS 16(Pt-II) Shellac : Part : II : — Machine Made Shellac
IS 75 : Linseed Oil Raw and Refined
IS 77 : Linseed Oil Boiled For Paints
IS 102 : Ready Mixed Paint, Brushing, Red Lead, Nonsetting, Priming
IS 104 : Specification for Ready Mixed Paint, Brushing, Zinc Chrome, Priming
IS 109 : Ready Mixed Paint, brushing, priming Plaster to Indian Standard Colour No.361, 631 White and off White
IS 117 : Ready Mixed Paint, Brushing, Finishing Exterior, Semigloss for General Purposes to Indian Standards Colours.
IS 133 : Enamel, Interior (a) Under Coating (b) Finishing
IS 137 : Ready Mixed Paint, Brushing, Matt Or Egg Shell Flat, Finishing Interior to Indian Standard Colour as required
IS 158 : Ready Mixed Paint, Brushin g, Bituminous Black, Lead Free, Acid, Alkali and Heat Resisting
IS 217 : Specification for Cut Back Bitumen
IS 218 : Specification for Creosote and Anthracene Oil For Use As Wood Preservatives
IS 290 : Coal Tar Black Paint
IS 337 : Varnish, Finishing Interior
IS 341 : Black Japan, Types ‘A’, ‘B’ & ‘C’
IS 347 : Varnish, Shellac for General Purposes
IS 348 : French Polish
IS 419 : Putty for Use On Window Frames
IS 427 : Distemper, Dry Colour as Required
IS 428 : Distemper, Oil Emulsion, Colour as Required
IS 524 : Varnish, Finishing, Exterior, Synthetic Air Drying IS 533 : Gum Spirit of Turpentine (Oil of Turpentine)
IS 712 : Specification For Building Limes
IS 1200 (Pt-XII) : Method of Measurements of Building and Civil Engineering Works : Part : XII — : Plastering and Pointing
IS 1200 (Pt-XIII) : Method of Measurements of Building and Civil Engineering Works : Part : XIII — : White Washing, Colour Washing Distempering and Painting Of Building Surfaces.
IS 1200 (Pt-XV) : Methods of Measurements of Building and Civil Engineering Works : Part : XV — : Painting, Polishing, Varnishing etc.
IS 2339 : Aluminium Paint For General Purposes, in Dual Container
IS 2547 (Pt-II) : Gypsum Building Plasters Pt.II Premixed Light Weight Plasters
IS 2932 : Enamel, Synthetic, Exterior (a) Undercoating, (b) Finishing
IS 2933 : Enamel, Exterior (a) Undercoating (b) Finishing
IS 5410 : Cement Paint
IS 5411 (Pt-1) : Plastic Emulsion : Paint Part I For Interior Use
IS 6278 : Code of Practice For White Washing and Colour Washing

REPAIRS TO BUILDING WORK

IS 419 : Specifications for Putty for use in Window Frames
IS 14900 : Specifications for Transparent Float Glass

DISMANTLING & DEMOLISHING WORK

IS 1200 (Pt – XVIII) : Method of Measurements of Building and Civil Engineering Works (Part –XVIII) : Demolition and Dismantling
IS 4130 : Demolition of Buildings–Code of Safety

ROAD WORK

IS 73 : Specification for paving bitumen
IS 164 : Ready mixed paint for road marking
IS 217 : Specification for cut back bitumen
IS 8112 : Specification for 43 grade ordinary Portland Cement
IS 278 : Specification for galvanized steel barbed wire for fencing
IS 334 : Glossary of terms relating to bitumen and tar
IS 383 : Specification for coarse and fine aggregate from natural sources for Concrete
IS 460 : Specification for test sieves
IS 516 : Method of test for strength of concrete
IS 702 : Specification for industrial bitumen
IS 712 : Specification for building limes
IS 1195 : Specification for bitumen mastic for flooring
IS 1199 : Methods of sampling and analysis of concrete
IS 1203 : Method of testing tar and bituminous material, determination Of Penetration
IS 1205 : Method of testing tar and bituminous material determination Of softening paint
IS 1208 : Method of testing tar and bituminous material determination Of Ductility
IS 1212 : Method of testing tar and bituminous material determination of loss of heating
IS 1216 : Method of testing tar and bituminous material determination Of solubility in carbon-di-sulphide, trichloroethylene
IS 1834 : Specification for hot applied sealing compound for joint in concrete
IS 1838 (Pt.1) : Specification for performed fillers for expansion joint in Concrete pavements and structures (non extruding and resilient type/ bitumen impregnated fibre)
IS 2386 (Pt.I) : Method of test for aggregate for concrete particle size and shape IS 2386 (Pt. II) 1963 : Method of test for aggregate for concrete estimation of Deleterious materials and organic impurities
IS 2386 (Pt.III) : Method of test for aggregate for concrete specific gravity, density,voids, absorption and bulking
IS 2386 (Pt.IV) : Method of test for aggregate for concrete mechanical properties
IS 2720 (Pt.V) : Method of test for soil: Determination of liquid and plastic limit.
IS 2720 (Pt. VII) : Methods of test for soils: part VII determination of water content dry density relation using light compaction
IS 2720 (Pt. XXVIII) : Method of test for soil: determination of dry density of soils in place, by sand replacement method
IS 3812 : Specification for fly ash for use as pozzolana and admixture
IS 5317 : Specification for bitumen mastic for bridges decking and roads
IS 5640 : Method of test for determining aggregate impact value of soft Coarse Aggregates
IS 6241 : Method of test for determination of stripping value of road Aggregates

IRC STANDARDS:

IRC 10 : Recommended practice for borrow pits for road Embankments constructed by manual operation
IRC 29 : Specification for bituminous concrete for road pavements
IRC 36 : Recommended practice for construction of earth embankments for road works
IRC 60 : Tentative guidelines for the use of lime flyash concrete as Pavement base of sub base
IRC 88 : Recommended practice for lime flyash stabilized soil base/ sub base in pavement construction
IRC 107 : Tentative specification for bitumen mastic wearing courses

SANITARY INSTALLATIONS WORK

IS 771 (Pt.1) : Specification for glazed fire clay sanitary appliances: Part 1: General requirements.
IS 771 (Pt.-2) : Specification for glazed fire clay sanitary appliances: Part 2: Specific requirements of kitchen and laboratory sink.
IS 772 : Specific action for general requirements for enameled cast iron sanitary appliances.
IS 774 : Flushing cisterns for water closets and urinals (Other than Plastic cistern)-Specifications.
IS 1300 : Phenolic moulding materials.- Specifications
IS 1703 : Water fittings- copper alloy float valves (horizontal plunger type) -Specification.
IS 1729 : Cast iron /Ductile Iron Drainage Pipes and pipe fittings for Over ground non pressure pipe line Socket and Spigot Series.
IS 1795 : Specification for pillar taps for water supply purposes.
IS 2267 : Polystyrene moulding and extrusion materials – Specifications
IS 2326 : Specification for Automatic Flushing Cisterns for Urinals (Other than plastic cisterns)
IS 2548 (Part-1) : Plastic seats and covers for water closets Part 1: Thermo set seats and covers – Specifications
IS 2548 (Part-2) : Plastic seats and covers for water closets Part 2: Thermoplastic seats and covers.- Specifications
IS 2556 : Vitreous sanitary appliances (vitreous china) –Specifications
IS 2556 (Part-1) : General requirements.
IS 2556 (Part-2) : : Specific requirements of wash-down water closets.
IS 2556 (Part-3) : Specific squatting pans.
IS 2556 (Part-4) : Specific requirements of wash basins.
IS 2556 (Part-5) : Specific requirements of laboratory sinks.
IS 2556 (Part-6) : Specific requirements of Urinals & Partition plates
IS 2556 (Part-7) : Specific requirements of accessories for sanitary appliances IS 2556 (Part -14) : Specific requirements of integrated squatting pans.
IS 2556 (Part -15) : Specific requirements of universal water closets.
IS 2963 : Specification for Copper alloy waste fittings for wash basins and sinks.
IS 3076 : Specification for low density polyethylene pipes for potable Water supplies.
IS 3389 : Urea formaldehyde moulding materials. – Specifications
IS 3989 : Specification for centrifugally cast (spun) iron spigot and socket soil, waste and ventilating pipes fittings and accessories.
IS 4827 : Specification for electroplated coating of nickel and chromium On copper and copper alloys.
IS 4984 : Specification for high density polyethylene pipes for potable Water supplies.
IS 4985 : Unplasticised P.V.C. pipes for potable water supply – Specifications.
IS 7231 : Plastic flushing cisterns for water closets and urinals – Specifications.
IS 13983 : Stainless steel sinks for domestic purposes –Specifications.

WATER SUPPLY WORK

IS 554 : Pipe threads where pressure tight joints are required on the threads-Dimensions, tolerances and designation.
IS 778 : Specification for copper alloy gate, and check valves for water Works Purposes
IS 779 : Water meters (domestic type) –Specification
IS 780 : Specification for sluice valves for water works purposes (50 to 300 mm size)
IS 781 : Specification for cast copper alloy screw down bib taps and stop valves for water services
IS 782 : Specification for caulking lead
IS 909 : Underground fire hydrant, sluice valve type-Specification
IS 1239 (Part 1) : Steel tubes tubular and other wrought steel fittings, Part 1- Steel tubes-Specification
IS 1239 (Part 2) : Specification for mild steel tubes tubular and other wrought
Steel fittings, Part 2-Mild street tubular and other wrought steel pipe fittings
IS 1536 : Centrifugally cast (spun) iron pressure pipes for water gas and sewage-Specification
IS 1537 : Specification for vertically cast iron pressure pipes for water, gas and Sewage
IS 1538 : Cast iron fittings for pressure pipes for water, gas and sewage -Specification
IS 1703 : Water fittings – copper alloy float valves (horizontal plunger type) -Specification
IS 2692 : Ferrules for water services- Specification
IS 3950 : Specification for surface boxes for sluice valves
IS 4736 : Specification for Hot-dip Zinc Coatings on mild steel tubes
IS 5312 (Part 1) : Swing type reflex (non return) valves for water works purposes. Part 1-Single door pattern
IS 5312 (Part 2) : Swing type reflex (non return) valves for water works purposes. Part 2-Multi door pattern
IS 5382 : Rubber sealing rings for gas mains, water mains and sewers IS 9762 : Specification for polyethylene floats (spherical) for float valves
IS 9763 : Plastic Bib taps and stop valves (rising spindle) for cold water servicesspecifications
IS 15450 : PE-AL-PE Pipes for hot and cold water suppliesSpecifications
IS 15778 : Chlorinated Polyvinyl Chloride (CPVC) pipes for potable hot and cold water distribution supplies-specifications.
IS 15801 : Polypropylene- Random Copolymer Pipes for hot and cold Water supplies-Specifications

DRAINAGE WORK

IS 458 : Pre-cast Concrete Pipes (with and without reinforcement).
IS 651 : Specification for Salt Glazed Stoneware Pipes and Fittings.
IS 783 : Code of Practice for Laying Concrete Pipes
IS 1726 : Specification for Cast Iron Manhole Covers and Frames
IS 1729 : Cast Iron /Ductile Iron Drainage Pipes and Pipe Fittings Socket and Spigot Series for Over-ground Non-pressure Pipe Line.
IS 4127 : Code of Practice for Laying of Glazed Stone Ware Pipes
IS 4885 : Specifications for Sewer Bricks
IS 12592 : Pre-cast Concrete Manhole Covers and Frames –Specifications

PILE WORK

IS-1200 (Part 23) : Method of measurement of building and Civil Engineering Works – Piling.
IS-2911 (Part 1/Sec. 1) : Code of practice for Design and Construction of pile foundation. Driven cast-in-situ piles.
IS-2911 (Part 1/Sec. 2) : Code of practice of Design and Construction of pile foundation. Bored Cast-in-situ piles.
IS-2911 (Part 1/Sec. 3) : Code of practice for Design and Construction of pile foundation. Driven pre-cast concrete piles.
IS-2911 (Part 1/Sec. 4) : Code of practice for Design and Construction of pile foundation. Bored pre-cast concrete piles.
IS-2911 (Part 3) : Code of practice for Design and Construction of pile foundation. Under reamed piles.
IS-2911 (Part 4) : Code of practice for design and Construction of pile foundation. Load test on piles.
IS-5112 : Safety Code for piling and other deep foundations.
IS-6426 : Specification for pile driving hammer.
IS-6427 : Glossary of terms relating to pile driving.
IS-6428 : Specification for pile frame.
IS-9716 : Guide for lateral dynamic load test on piles.
IS-14362 : Pile boring equipments. General requirements.

ALUMINIUM WORK

IS 733 : Wrought Aluminium and Aluminium Alloys, Bars, Rods and Sections (For General Engineering Purposes) –Specification
IS 737 : Wrought Aluminium and Aluminium alloy sheet and strip for General engineering purposes –Specification
IS 1285 : Wrought Aluminium and Aluminium Alloy, Extruded Rond Tube and Hollow sections (For General Engineering Purposes) – Specification
IS 1868 : Anodic coating on Aluminium and its Alloys-Specification
IS 1948 : Specification for Aluminium Doors, Windows and Ventilators
IS 3908 : Specification for Aluminium equal leg angles
IS 3909 : Specification for Aluminium unequal leg angles
IS 3965 : Dimensions for wrought Aluminium and Aluminium Alloys bars, rods and sections.
IS 5523 : Method of testing anodic coating on aluminium and its alloys.
IS 6012 : Measurement of coating thickness by Eddy Current Method
IS 6315 : Floor springs (Hydraulically regulated) for heavy doorsSpecifications
IS 6477 : Dimensions of extruded hollow section and tolerances
IS 12823 : Wood products- Pre-laminated particle board –Specifications.
IS 14900 : Transparent Float glass- Specifications.

WATERPROOFING TREATMEATMENT WORKS

IS 73 : Paving Bitumen Specifications
IS 702 : Specifications for Industrial Bitumen
IS 1322 : Specifications for Bitumen felts for Water Proofing and Damp Proofing.
IS 2645 : Specifications for Integral Cement Water Proofing Compounds
IS 3370 (Part -1) : Code of Practice for Concrete Structures for the Storage of Liquid: Part -1 General Requirements.
IS 3384 : Specifications for Bitumen Primer for Water Proofing and Damp Proofing
IS 7193 : Specification for Glass Fibre Bitumen Felts
IS 12200 : Provision of Water Stops at Transfers Construction Joints in Masonry and Concrete Dams – Code of Practice.
IS 12432 (Part-3) : Application for Spray Applied Insulation – Code of Practice Part-3 Polyurethane/ Polyisocyarurat